Can Your EU Hermes Gateway Meet Recovery Targets?

Prove a timed Hermes restore on a second EU host and trace where tool outputs go. Compare self-hosted and managed options against the same recovery deadlines and data-handling requirements.

Time recovery from the incident through the first reply

Run a clean-host drill with a synthetic session, a test channel, and the exact image reference you intend to recover. At the simulated loss, start the clock and record sequential durations for detection, acquiring a spare host, restoring state, and verifying a new channel reply against the restored session. Keep the primary gateway attached only to its own test identity so two instances cannot consume the same channel’s traffic. Measure the age of the newest state you actually recovered. For example, if a backup finished five minutes before the drill but contains state captured forty minutes earlier, use the capture age. The state directory can contain credentials alongside sessions and configuration, so use controlled backup access and leave credential contents out of the drill record.

Hermes Docker Setup | Hermes Agent

Trace a tool result beyond the EU host

Start with an orderable EU location for the VPS and identify the locations of backups, inferences, messaging, and any external tool execution separately. Trace a harmless synthetic identifier from the channel into the tool result and then into each service that receives it. Use redacted logs and service documentation to corroborate the route. Classify any unverified route as unresolved before enabling real data. Anthropic’s managed-agent documentation gives a concrete example of the split: tools can execute on your worker while their results still reach the managed service. Apply that same question to every option on the shortlist. A managed choice wins when it can demonstrate the required data route, the allowed state loss, and a recovery owner who can meet the measured deadline.

Choosing an agent environment - Claude Platform Docs

Pin down what must stay in the EU

Hetzner lists cloud locations in Germany and Finland. Select one that meets your VM location requirement and check whether CX23 is orderable there. For a solo gateway, use 2 vCPU, 4 GB RAM, and 40 GB disk as a starting target for the pilot. If CX23 is missing or cannot be provisioned, use an orderable configuration with comparable resources and record the region and charge shown at checkout.

Write down which data must remain in the EU. Track where the VM, backups, model requests, browser processing, and channel messages go. Verify each relevant provider's processing and storage terms before enabling live traffic. If the VM location is established and the policy also covers model or channel data, keep the pilot on synthetic inputs until those paths are verified.

Cloud-hosting provider for developers & teams

Bring up a private test gateway

Provision a Linux VM with your SSH key, connect using an SSH client, and install Docker and Compose using the instructions for your distribution. Use the Hermes Docker guide to run the official image's interactive wizard with a dedicated host directory mounted at /opt/data. Then use the guide's Compose service for your selected release, preserving that mount. Keep optional management interfaces unpublished during the first test.

Connect a disposable messaging channel and send a prompt with an expected short answer. Close your SSH session and send a second prompt. A reply from the second test establishes that the gateway can work independently of your terminal. If setup fails after pasting configuration into the browser console, reconnect through SSH and check punctuation in the saved configuration with secret values redacted.

Hermes Docker Setup | Hermes Agent

Rehearse losing the first server

Decide how much state you can afford to lose and how long the gateway can be offline. Use a backup that includes the state and credentials needed to meet those limits, and protect it as a secret. Hermes documents full-backup restoration with hermes import and distinguishes that from a profile export, which omits credentials. During a recovery rehearsal, leave production tokens disabled until you are ready to cut over.

In an illustrative drill, suppose the team allows 24 hours of lost state and 30 minutes of downtime. Restore a backup taken 12 hours earlier onto a second EU VM. Check for a known session saved before the backup and send a fresh message through a test channel. If those checks finish in 24 minutes, the drill meets both limits. If provider authorization is missing, time the reauthorization as part of recovery.

Install Hermes Agent: Official Guide | Nous Research

Sources