HOME RUN! 💥
Over right-center wall by 12.4 ft
4.82s
Projected Distance 398 ft Wall: 374 ft (+24 ft)
Exit Velocity 103.4 mph Hard-Hit (95+ mph)
Launch Angle 32.0° Sweet-Spot Window
Apex Height 94 ft Hang: 4.8s
xHR (30 MLB Parks) 28 / 30 xBA: .910

Selected Ballpark Target Milwaukee • Line: 345 | LC: 374 | C: 400

At this spray angle (+14° RF-CF), the outfield fence is 374 feet from home plate with an 8.0 ft wall height. The ball crossed the fence at a height of 20.4 feet, resulting in a safe clearance of 12.4 ft over the yellow boundary.

MLB 30-Park Outcome Roster 28 Homers

Flight computation complete: 4.82s hang time, Magnus lift validated.

1. The Aerodynamics of the Home Run

A hit baseball does not follow a simple parabolic vacuum trajectory. A 103 mph ball experiences significant aerodynamic drag (retarding acceleration) and the Magnus effect.

Backspin creates higher air velocity over the top of the seam pattern, generating net upward lift. This delays descent, adding 20–40 feet of carry compared to a knuckleball flight.

2. Jackson Chourio's Opposite-Field Power

Young phenom Jackson Chourio electrified Milwaukee during the postseason by driving 98+ mph heaters with inside-out barrel whip, producing 103–106 mph exit velocities to the right-center gap.

American Family Field features a 374-foot right-center alley and an 8-foot wall. Slicing backspin carries rightward-angled flies deeper into the Milwaukee stands.

3. Microclimate & Air Density Impacts

Every 10°F rise in air temperature reduces air density, increasing batted ball distance by roughly 2.5–3 feet. Coors Field's 5,200ft altitude reduces density by ~18%, transforming routine flyouts into 420-foot bombs.

Tailwinds directly subtract from relative airspeed, suppressing drag and adding up to 15–25 feet on deep center-field drives.

Velocity components and force assumptions in the saved baseball model

Read the explanation

The saved baseball model starts with exit speed one hundred three point four miles per hour and launch angle thirty-two degrees. Its conversion gives about one hundred fifty-one point six five feet per second. The vertical component is speed times sine thirty-two, about eighty point three six feet per second. Horizontal magnitude is speed times cosine thirty-two, about one hundred twenty-eight point six one. These two bars use the actual source decomposition before drag, spin and wind. Spray angle turns the horizontal velocity within the field. The default fourteen degrees gives lateral velocity horizontal speed times sine fourteen, about thirty-one point one one feet per second. Forward velocity is horizontal speed times cosine fourteen, about one hundred twenty-four point seven nine. The squared components sum back to the squared horizontal magnitude. This rotation changes direction without adding initial kinetic speed; park-wall geometry then depends on which direction the ball travels. The source integrates flight every point zero one seconds. Drag scales with air density and relative speed squared, opposing relative velocity. Its density term multiplies a temperature factor by exponential minus altitude divided by twenty-seven thousand. Raising altitude from zero to five thousand feet scales that part by about point eight three one. Backspin also decays by point nine nine nine five each integration step, so after one hundred steps its spin is about ninety-five point one two percent of its initial value. These are source model assumptions, not a calibrated Statcast or forecast claim.

Enjoy this tool? Build your own with Super