RV Hazard and Vector Sanitation Calculator

Contamination Profile Step 1: Define Area

Vehicle / Habitat Classification

Treatable Floor Area: 240 sq ft

Infestation & Vector Severity

Assigned Decon PPE Grade

Negative Air / Exhaust (CFM)

Decontamination Crew Size

Spatial Zone Contamination Map Target Dwell: 30m

Driving Cab
Moderate Risk

Galley / Food
High Vectors

Wet Bath / Hold
Biohazard Core

Rear Bunks
Nesting Site

Note: Disinfection must proceed from highest air-turnover perimeter to the primary nesting core. Never dry sweep rodent droppings (prevents aerosolization of leptospirosis / hantavirus pathogens).

Sanitization Plan & Ratios Real-Time Output

Disinfectant Solution

14.5gal

Total 1:10 working volume

Bleach Concentrate

29.0cups

6.0% sodium hypochlorite

Contact / Dwell Time

30min

Full wet saturation required

Air Exchange Rate

15.6ACH

Purge cycle: ~23 minutes

Decontamination Clearance Checklist

Pre-wet rodent urine/feces with 1:10 bleach solution before physical contact (No vacuum/dry sweep) Negative pressure ventilation established (min 450 CFM exhausted away from common entryways) All non-porous and contaminated porous surfaces soaked for requisite 30-minute contact time Double-bagged biohazard containment in labeled 3-mil yellow/red bio-waste disposal bags

Remediation Log ready. Adjust parameters above to recompute or export log.

Sanitation Protocol Basis: Formulated per CDC Guidelines for Decontaminating Rodent-Contaminated Areas (Hantavirus & Leptospirosis containment protocols) and OSHA 29 CFR 1910.1030 Bloodborne Pathogens Standard for vehicle vector decontamination.