DIY Wood & Copper PC Rig Workbench & Thermal Simulator

1. Chassis & Wood Crafting Walnut Burl & Steel Frame

Chassis Base Timber

Blowtorch Charring (Shou Sugi Ban) 65%

Surface heat-sealed with heavy soot grain. High aesthetic contrast with copper tubing; slight surface thermal emissivity gain.

2. Hand-Bent Copper Loop 12mm OD / 120 LPH

Copper Tubing Diameter 12 mm

Coolant Pump Flow Rate 120 L/h

Radiator Push-Pull Fan Speed 1450 RPM

3. Component Thermal Loads (TDP) 575 W Load

CPU Power Target 225 W

GPU Power Target 350 W

Ambient Workshop Temp 21 °C

Artisanal Enclosure Fluid Simulation ACTIVE COOLANT CIRCULATION

Rough & Canvas Vector Mode

Pure Copper Run

Coolant Return

Thermal Convection

Charred Hardwood

STEADY STATE CPU TEMP

64.5 °C

NOMINAL DELTA

STEADY STATE GPU TEMP

68.2 °C

OPTIMAL DIE

COPPER DISSIPATION EFFICIENCY

89.4 %

HIGH CONVECTION

THERMAL HEADROOM

75.0 W

OVERCLOCK BUFFER

AESTHETIC FINISH SCORE

94 / 100

SHOWCASE BUILD

Simulated Stress Tester (AIDA64 / FurMark Heavy Pass)

Applies 100% saturation load over 5 seconds to test thermal soaking in copper runs.

READY

Hand-Crafted Rig Telemetry Specs Verified Physics Model