Super Super

NFL Play Designer

Selected: Z receiver Cover 2
Drag any receiver to draw a route
ConceptMesh
Open receiver—
Throw window—
Routes drawn0 / 5
Pick a receiver, then drag on the field or tap a route button.

What makes an NFL passing concept work

Every NFL pass play is a small piece of choreography: five eligible receivers run coordinated routes designed to stress one specific area of a defense. Coaches call it a "concept" because the routes are not independent — the flat route holds a linebacker so the dig can settle behind him, or the deep post pulls a safety so the crosser runs into open grass. The play designer above lets you draw those routes yourself and watch how a defense responds.

This is a teaching tool, not a playbook. The route shapes are simplified, the defenders follow rule-based assignments rather than real NFL technique, and the "open receiver" read is a heuristic. What it does show honestly is the geometry that makes concepts work: leverage, spacing, and timing.

The five concepts in the designer

Mesh

Two receivers cross underneath at 5–7 yards while a third runs a deep route to clear the middle. Mesh is a Cover 2 and man-coverage killer because the crossing receivers create natural picks against trailing defenders. Against Cover 3, the deep-third safeties can rally to the crossers, so the concept needs a vertical threat to hold them.

Four Verts

Four receivers release vertically, splitting the deep coverage into as many vertical seams as possible. Against single-high Cover 3, the two inside seams stress the middle safety. Against two-high, the outside receivers work the sideline holes. The concept demands protection time — it takes 3+ seconds for the verticals to separate.

Dagger

A deep dig at 12–15 yards paired with a vertical clear-out and a short check-down. Dagger attacks the hole between the hook and the deep middle defender. Against Cover 1 man, the dig must win against tight coverage; against zone, it settles in the vacated window.

Smash

A high-low stretch on the sideline: a corner route at 12 yards over a hitch at 5 yards. Smash is a classic Cover 2 beater because the cornerback must choose between the flat and the deep outside. Against Cover 3, the deep third defender can cover both, so the concept stalls.

Flood

Three receivers attack one side at three depths — deep, intermediate, short. Flood overloads a single zone defender's responsibilities. It works against Cover 3 when the deep route pulls the corner and the intermediate route sits under the safety.

Rub / Pick

Two receivers run tight crossing routes designed to impede man defenders. Against Cover 0 pressure, the rub creates instant separation on a quick throw. Against zone, the rub is less useful because defenders are not trailing.

How to read the field in the designer

The offense lines up at the bottom of the field with the quarterback under center. Receivers are labeled X (split end, left), Y (tight end), Z (flanker, right), H (slot) and F (back). Drag any receiver to draw a custom route, or select a receiver and tap a route button to apply a standard shape.

Defenders are drawn as small circles with coverage labels. When you press Run play, receivers run their routes and defenders react according to their coverage rules. The readout shows which receiver is most open at the end of the play and how wide the throw window is.

Coverage rules the tool uses

CoverageDeep defendersWhat beats it
Cover 2Two safeties split the deep halfDeep middle seam, smash, mesh crossers
Cover 3One free safety deep middle, corners in deep thirdsFour verticals, flood, deep crossers
Cover 1 manOne free safety deep middle, man underRub routes, back-shoulder, dagger dig
Cover 0 blitzNo deep help, all manQuick rub, hot route, slant

What this tool does not do

Frequently asked questions

Can I save my play and come back to it?

Yes. The Export play card button downloads a PNG of the current field with your routes, coverage, and readout. You can also copy the play summary as text. The tool does not store plays on a server — everything runs in your browser.

Why does the open receiver change when I switch coverage?

Each coverage assigns defenders to different zones or receivers. A route that is wide open against Cover 2 might be covered against Cover 3 because a deep-third safety is now responsible for that area. The readout reflects the defender positions at the end of the play.

Can I draw routes for all five receivers?

Yes. Select a receiver by clicking on them, then drag on the field or tap a route button. Each receiver can have an independent route. The Clear routes button resets all five.

Does this work on a phone?

Yes. The field is touch-enabled — drag with your finger to draw routes. On narrow screens the field switches to a taller aspect ratio so the routes remain visible.

Is this based on a real NFL playbook?

No. The concepts are widely known route combinations taught at every level of football, but the specific route depths and defender rules are simplified for teaching. This is not affiliated with the NFL or any team.